This post will show you how to make a projector screen.
Materials Needed: 1) Two (2) pieces of plywood (approx. 6″x6″ each). You can get these at your local hardware store or big box store like Home Depot. 2) Spray adhesive. The most common type found in stores is 3M Super 77, but Loctite PL Premium works well too. Just make sure the spray adhesive is rated for use with wood and paint, not just paper! Note that in this example we used Loctite PL Premium because it was cheaper in our area than 3M Super 77 at the time of purchase. This means our screen cost about $40 including spray adhesive, plywood, and paint. 3) Acrylic Paint. Any brand will do. We used a mostly white paint to get the best brightness from our projector. You can find flat white acrylic at most big box stores and hobby stores that sell model kits. 4) 1/16 inch grommets (for the edges of your screen). Make sure they are made for use with 1/16 inch thick material! You can find these at hardware stores or online through Amazon or eBay. 5) A flat surface to put the p